SEM 2K Urethane Chip Guard: Training Series – Episode 5


SEM 2K Urethane Chip Guard is a job-sized, two-component, shake-and-shoot, textured coating for reproducing a variety of OE textures and chip guards. The two-component system helps eliminate common problems seen with one-component products such as long flash times, pinholes, solvent trap, delamination and solubility. 

SEM 2K Urethane Chip Guard


  • OEM recommended
  • 2K durability with 1K convenience
  • Reproduces fine to coarse and light to heavy OE textures
  • Builds heavy textures without trapping solvent
  • No flash time required between coats
  • 50 state compliant
  • Pinhole free
  • Easy to use shake-and-shoot system
  • R.O. billable unit
  • 16 defined textures with detailed instructions
  • Non-yellowing and non-staining
  • Tintable, paintable or can be used as a textured top coat
  • Impact and chemical resistant
  • Excellent for sound dampening

Can You Replicate This Chip Guard?

  • Steel
  • Aluminum
  • Galvanized steel
  • Existing OEM paint
  • Polyester fillers
  • E-coat
  • Fiberglass
  • SMC and FRP
  • Epoxy primer
  • 2K urethane primer and sealer
  • ​Opaque gray
  • 12 oz. (mixed) kit
  • Produces variety of textures see TDS for application details on 16 different textures
  • Pot Life @ 70°F and 50% R.H.: 20 minutes
  • Flash Time: 0 – 20 minutes
  • Paint Time: 20 minutes – 4 hours
Each Kit Contains:
  • 1 – 52008 Chip Guard 8 oz. filled pint
  • 1 – 52004 Activator 4 oz
  • 1 – 711032K Urethane Chip Guard Applicator

Tech Data Sheet (TDS)

52008 Safety Data Sheet (SDS)

52004 Safety Data Sheet (SDS)

See your local jobber for pricing and availability.


Join The Buzz Club

Subscribe to our newsletter for the latest updates