Are You Using Weld-Thru Primer Correctly?

5 STAR CORROSION PREVENTION5 STAR Advantage WELD-THRU PRIMER is A durable, zinc enhanced coating that protects all metal surfaces. Electrochemical galvanic action keeps on protecting even if scratched. Dry film is 86% pigment which results in less smoke and electrode wear when welding, and cuts faster than 100% zinc rich coatings. Stops rust creepage.

SKU: 3527 Weld Thru Primer – Gray Aerosol 15 oz.

See your jobber for pricing


A proper repair restores more than just a vehicle’s appearance—it adds protection from corrosion and damage down the line. Following Toyota’s established corrosion prevention processes helps to ensure that the vehicle you repair can Perform as designed for years to come.


Over time, metal reacts with the environment and can deteriorate, or corrode, when liquids, gasses, and other contaminants affect its strength and appearance. Coatings like weld-thru primer, epoxy primer, paint, seam sealer, and cavity waxes are commonly used to help protect to protect bare metal from corrosion and rust. Specifically, Toyota requires the use of
weld-thru primer during welding procedures on collision repairs to help prevent corrosion and rust where two metal pieces are welded together.


Weld-thru primer may be confused with paint primer, but they have entirely different uses. Weld-thru primer is used to protect bare metal from corrosion during the collision repair process, whereas paint primer is used to cover surface flaws and provide a proper foundation for the paint.

Weld-thru primer is usually made with zinc; however, some are copper based. For collision repairs on Toyota and Lexus vehicles, zinc-based primer must be used (consult the repair manual) during welding procedures because these vehicles are manufactured using an e-coat process. Zinc is also more resistant to corrosion than other types of primers, such as those made with copper.


Before welding, weld-thru primer is sprayed or brushed onto the bare metal around the welding area. During the welding process, the weld-thru primer liquefies and galvanizes the metal around the weld which helps protect the metal from future corrosion. It helps provide permanent rust protection on the inner edges of the welded metal pieces. For the best results when using a weld-thru primer:

  • The area to be welded should be thoroughly clean, bare metal.
  • Remove any paint or protective coatings, clean the surface with a solvent and sand lightly.
  • Coat the bare metal surface, including any overlaps, with weld-through primer.
  • Let the primer cure thoroughly before welding to ensure the zinc bonds properly to the metal.
  • After welding, remove any remaining weld-through primer before painting to ensure paint will adhere to painted surfaces.

When new customers come into your shop, they expect their vehicle to be returned to factory specifications. So, it’s important to properly apply corrosion preventative compounds (i.e. anti-chipping coatings, seam sealers, anti-rust agents, etc.) that will help inhibit the development of corrosion and rust and help maintain vehicle value. By consistently following Toyota and Lexus repair recommendations, you can help to ensure the best repair outcome resulting in an experience your customers will be happy to share with friends and family.

Additional information on vehicle-specific seam sealer specifications can be found in the Toyota/Lexus Repair Manuals for Collision Damage. To reduce the chances of corrosion resulting from collision repairs, refer to the following Collision Repair Information Bulletins (CRIBs):

  • CRIB #181: Welding Specifications and Substitutions
  • CRIB #186: Corrosion Prevention for Collision Repair
  • CRIB #63: Repair Procedures for Rust-Resistant Sheet Metal
  • CRIB #57: Pinch Weld & Frame Clamping
  • CRIB #127: Glass Replacement
  • CRIB #163: Sealing Hem Flanges & Body Seams

FOR ACCESS TO COLLISION REPAIR MANUALS AND CRIBS, go to Toyota’s Technical Information System website (TIS) https://one.tis.toyota.com

Credit: Toyota Collision Repair & Refinish Training

5 STAR Advantage Pro Aerosols

3311 Paintable Rubberized Undercoating Aerosol (Black) 18oz.
3500 Enamel Spray Paint – Gloss Black Aerosol 12oz.
3501 Enamel Spray Paint – Semi-Gloss Black Aerosol 12oz.
3502 Enamel Spray Paint – Flat Black Aerosol 12oz.
3521 Lacquer Spray Paint – Gloss Black Aerosol 12oz.
3522 Lacquer Spray Paint – Flat Black Aerosol 12oz.
3523 Lacquer Semi-Gloss Black Aerosol 12oz.
3524 Super View Guide Coat Aerosol 15oz.
3530 Premium Adhesion Promoter Aerosol 15oz.
3711 Primer Spray – Light Gray Aerosol 12oz.
3525 Sandable Primer – Light Gray Aerosol 15oz.
3526 Filler Primer – Gray Aerosol 15oz.
3527 Weld Thru Primer – Gray Aerosol 15oz.
3528 Self Etch Primer – Light Gray Aerosol 15oz.
3529 Flexible Primer – Light Gray Aerosol 15oz.
3531 Etch Primer – Black Aerosol 15oz.
3532 Trim Paint Gloss – Black Aerosol 15oz.
3533 Trim Paint Flat – Black Aerosol 15oz.
3534 Trim Paint Semi-Gloss Black Aerosol 15oz.


Join The Buzz Club

Subscribe to our newsletter for the latest updates